Current as of 01/01/2020 Subject to change without notice

Suggested Gunsmith Service Charges
Availability of parts & shop workload varies

Shop Bench Time is billed at $120 an hour or part thereof.
Shop Machine Time is billed at $300 an hour or part thereof.
BARREL THREADING
Stripped-Bolt Action-Tapered Barrel:
> Threading (Due to lathe size limitations, barrels attached to receivers must be 18.25" or longer) $145
add- Shorten and crown barrel (shorten to a length of 18.25” or over) $30.00
add- Crown barrel $7.00
add- Strip and re-assemble action $40.00
Package Deal. Shorten and crown barrel; thread barrel; strip and re-assemble rifle $200.00

Stripped Non-Tapered Barrels Only
>AR-15 Barrel Threading of stripped barrel (any length) $60.00 add- Crown barrel $7.00
add- Shorten and crown barrel (any length) $30.00
add- Remove barrel from upper receiver and reassemble $35.00 Package Deal. Remove barrel from upper receiver and reassemble, shorten and crown barrel, thread barrel. $105.00
*All other rifles require custom quote (ie… FAL, M1A, Mini 14, HK’s, AK’s etc…). Many of these rifles require extensive disassembly in order to allow them to be held in a lathe.*

BARREL SHORTENING
*Stripped bolt action tapered barrels ( Rifle must be stripped of all parts including, trigger group, scope, and scope mount base)*
>Barrel Shortened (Barrels can only be shortened to 18.25” +) $70.00
add- Strip and reassemble action $40.00

AR-15/ Other stripped barrels (non-tapered variety only) 
>Barrel Shortened $50.00
add- Strip AR-15 barrel from upper receiver $35.00

BLUE PRINT AACTIONS
*Barrel Profile Specific Action Blueprinting- We offer this service only to rifles with non-tapered barrels. If the barrel cannot be removed from the receiver with a straight walled bushing, then fabricating a custom bushing would be very cost prohibitive. Please call for custom quote.*
>Remington & Savage Bolt Action -True front of receiver, lap bolt lugs & receiver locking recesses, true & lap bolt face, clean & true receiver threads, surface grind recoil lug $300.00
>Mauser 98 Action – Face & true front of receiver, re-cut inner barrel seat, lap bolt lugs & receiver locking recesses, true & lap bolt face, retrace threads $350.00
>Winchester, Weatherby & Ruger – True front of receiver, lap bolt lugs & receiver locking recesses, true & lap bolt face, clean & true receiver threads $275.00

CHAMBERING SERVICES(call to verify availability of chamber reamer)
Stripped non-tapered barrel
>Precision Chambering $140
add- Install barrel onto receiver. Torque down to specs. (Remington 700 and Savage 110- call for other rifles). $25.00
add- Shorten barrel length and crown muzzle $30.00
add- Thread muzzle end of barrel $60.00
Package Deal: all services above (Service does not include profiling of barrel) $315.00
add- Profile and thread barrel shank to fit to receiver. Headspace barrel to receiver (due to manufacturing differences/ tolerances, we require the bolt to be used with the rifle to headspace the action) (action must be stripped of ALL parts) (V threads only) $95.00

ADDITIONAL LATHE SERVICES
Remington 700 Tactical Bolt Knob Installation
>Turn Remington 700 bolt down to diameter and thread for 5/16x24 threads $95.00
add- Install ATT-TACTICAL bolt knob oversized aluminum $33.00

OTHER SERVICES
General Firearms Gunsmithing
>Enlarge #6-48 sight base mounting screws to #8-40 $75.00 >Remove stripped scope mount base screws and enlarge to #8-40 $135.00
>Supply and install Meprolight night sights on your firearm -for AK-47 $150.00
>Supply and install Meprolight night sights on your firearm -for AR-15 $130.00
>Supply and install Meprolight night sights on your firearm -for shotguns Call for pricing

AR-15 SPECIFIC SERVICES
>Pin lo-profile gas block $50.00
>Dimple set-screw locations of lo-profile gas blocks $25.00
>Relocate Gas Port. Move from a rifle length to a mid/ carbine; or from a mid-length to a carbine length. *This service is to weld up the current gas port, turn down the barrel to appropriate dimensions (moving the gas block seating shoulder back) and drilling a new gas port. You will need this service if you shortened your 20” rifle length gas port barrel to 16”. (barrel must be stripped) $75.00
add- Disassembly and reassembly of barrel from upper receiver $35.00
>Drill new gas port. *This service is if you have a new barrel without a gas port but with a barrel extension installed $25.00
>Open .223 chambers to 5.56mm NATO. (Barrel must be stripped from receiver). *This service is unavailable on chrome lined/ nitride chambers $60.00
add- Disassembly and reassembly of barrel from upper receiver $35.00
>Install and headspace barrel extension to AR-15 barrel (non-chrome lined/ nitride chambers). *For chrome lined/ nitride chambers please call. (customer supplied extension) $60.00 add- Drill gas port $18.00
add- Align extension indexing pin to pre-drilled gas port (non- chrome/ nitride barrels). *For nitride or chrome lined barrels please call. $60.00
*Call for quotes on; removing welded on muzzle devices, removing a pinned-on FSB or gas block on a barrel with a pinned-on muzzle device, permanently attach a muzzle device and other AR-15 gunsmithing work*

AK SPECIFIC SERVICES
>AK Build. Customer supplied parts kit, rivets, finished receiver, 9.22r compliant parts, and SAFE ACT compliant grip/stock (active LEO exempt). *Price includes removal of threads on barrel. Outside diameter of threaded portion will be turned down to an outside diameter of .500”. Price includes test firing. All parts must be in a de-milled condition. $335.00 add- Fitting of under-folder stock to improperly mated receiver/ rear trunnion or undrilled receiver. *This service applies if you have a Polish under folder receiver or with a Hungarian under-folding stock or if your receiver is not drilled for an under-folder stock $85.00
add- Drill trunnion holes in an undrilled receiver/ fit a misaligned receiver to trunnion mating. $50.00
add- De-mill parts kit. *This service is to remove the rivets from a parts kit and to prep the parts to be installed $140.00 add- Meprolight AK tritium sight package upgrade (front and rear sights) $140.00
add- Heat treat and temper receiver to spec. *This service applies to those who bought receivers from places like Centerfire Systems or Atlantic Firearms. Most receivers are hardened only around the trigger and hammer pin holes. The holes for the rivets and the rest of the receiver still remain soft. We will properly heat treat the entire receiver and temper it to proper specs $70.00
>Fix a canted front sight. *Sights will be properly aligned and the front sight’s retaining pin holes will be re-drilled to slightly oversize and re-pinned. $100.00
*Our builds are done using Rivets. All parts are mated/ tuned to provide optimal function. *Please call for builds of other types of rifles. There are many types of rifles we can build. (FALs, M1A’s, Galils, Garands, M1 carbines, VZ-58’s etc…)*

This Suggested Price List is only a sampling of the services we provide. Please call if the service you're looking for is not listed.

NOTE: We do not cut pistol slides for RMR style sights anymore due to the plethora of custom pistol slide manufacturers.